晟睿實業有限公司 IRONMAN LOCK & HARDWARE CO., LTD.

螺紋襯套手動工具

SELF TAPPING THREADED INSERT

MANUAL INSTALLATION TOOLS

孔徑：

孔徑數據標示在上方資料表內，以參考為目的。
孔徑隨著材料、裝置的扭力和效果的需求變大或變小，最理想的孔徑應該是決定於樣品和要組裝的材料。

孔深：

透空的裝配物體：襯套的長度不應該大於板厚 。
盲孔的裝配物體：孔深應該為1.2X襯套長度，這個數據標示於上方的資料表內。

倒角：

必需要60度的沙拉頭來確保襯套和組裝母件是平面的 。

壁厚：

壁後應該為0.35~0.5X孔徑 ，依裝置的材料做決定。

1. HOLE SIZE:

RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.

2. HOLE DEPTH:

IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.

3. COUNTERSINK

A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.

4. WALL THICKNESS

WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.

晟睿實業有限公司

IRONMAN LOCK & HARDWARE CO., LTD.

TEL: +886-4-7283965  FAX: +886-4-7283897

E-mail: ironman53153551@gmail.com